Categories
Contact Us

Dongguan Qiaochu Mechanical & Electrical Technology Co.,Ltd

Address: No.3, Yaxin Alley, Xiaobian Second Industrial Park, Chang An Town, Dongguan City, Guangdong Province, China

Tell: 86-769-82586255

Fax: 86-769-85078982

Mobile/Whatsapp:+8613650002375/18070104929

Wechat:13650002375

Email: sales@qc-automatic.com

Service Hotline
+86-769-82586255

News

Home > NewsContent

High Viscosity Fluid Pump Reduce Flow Resistance, Improve The Absorption Capacity

The High Viscosity Fluid Pump belongs to the internal rotor pump. The rotor rotates in the same direction in the fully enclosed pump body. The crescent plate of the pump body and the front cover separates the suction port and the discharge port. Rotation in the suction port to form a negative pressure, the liquid was inhaled, the rotor will be brought to the liquid discharge, pressure discharge pump, complete the liquid delivery. As the high viscosity of the pump to send the medium viscosity is high, in order to reduce the flow resistance, improve the suction capacity of the pump, the media must be heated or heat. Usually heating the heating element, the viscous liquid can be heated evenly. If the temperature fluctuations are not high, the transmission of high viscosity liquid prone to degradation, it is recommended to use fluid heating, especially the displacement of the gear pump. Fluid heating is divided into built-in, external structure. The so-called built-in type refers to the gear pump pump or the end of the internal design of the sudden set of hot, the external type is through the bolt will be connected with the pump jacket. To the jacket through the steam, heat oil, or cooling water, according to the specific circumstances of the media. Built-in type for the delivery of liquid temperature uniformity requirements are higher, or require uniform cooling of the high temperature liquid occasions

High Viscosity Fluid Pump is a new type of high-viscosity pump based on petroleum, chemical, oil, medicine, dyestuff, paint, food and other industries, Cangzhou Shiqi high temperature pump research and development of new type of High Viscosity Fluid Pump, Its unique structure, it is widely used in different nature, different viscosity of the media delivery. The pump mainly has inner and outer rotor, shaft, pump body, front cover, bracket, seal, bearing and so on. Sealed with mechanical seal and packing seal in two forms, for high temperature, high viscosity and corrosive medium, the use of filler seal. When the easy-to-crystallize material is transported, it can be designed with the insulation jacket on the front cover and the pump body, and melted by steam insulation during operation. From the spindle extension to the pump as clockwise rotation. High Viscosity Fluid Pump for medium temperature: -10 ℃ -200 ℃

High Viscosity Fluid Pump output displacement and flow, flow pulsation is small. So that the new product has a high value-added and competitive advantages, in order to deal with the traditional lack of two gear gear pump supply a new way to replace the existing gear pump, screw pump, etc., in petrochemical, light industry, food And other industries high viscosity liquid delivery areas of the development and application prospects. China's current development in this area is still very little, much room for development.

The High Viscosity Fluid Pump is a common gear pump for structural and operational reasons, which is significantly superior to existing gear pumps in terms of smooth running and service life. The new gear pump according to the "unit displacement of the smallest pump" as the purpose of optimization, improve the pump cost.

In the petrochemical industry, the transportation of high-viscosity liquids (such as synthetic rubber, resin, fiber polymerization solution, etc.) is one of the main consumption processes, and the machinery used to complete the liquid conveyance is a pump of various types. Because the viscosity of the stock solution is high, the suction resistance of the pump is larger. In order to ensure the self-priming ability of the pump, the positive displacement pump is used to keep the high viscosity liquid. Gear pump is the most simple one of the positive displacement pump, because of its simple structure, light weight, low cost, limited viscosity changes, the liquid is not sensitive to dirt, High Viscosity Fluid Pump pumping machine is good, work Reliable, so often used in the situation is more harsh, the accuracy of the request is not high places to send high viscosity liquid. With the new technology, new information, new technology from time to time, Cangzhou Shiqi High Temperature Pump Co., Ltd. through research and improvement, and now can also use High Viscosity Fluid Pump to save the. In addition, the High Viscosity Fluid Pump can also be used as a high viscosity liquid pressurization, inclusions, metering and spinning. High Viscosity Fluid Pump to keep the liquid is often solid at room temperature, in the insulation conditions for the liquid. Therefore, the High Viscosity Fluid Pump in the delivery of these liquids, not only need to deal with the problems caused by high viscosity, and often accompanied by high temperature, erosion and other extraordinary problems analysis, to study the type of High Viscosity Fluid Pump and preventive measures, as a way to reduce the problem, The quality of the work of the pump, delay the useful life of the wrist, is increasingly being people's attention. High Viscosity Fluid Pump types of defects in the diagnosis of High Viscosity Fluid Pump work, it was found that most of the gear pump is not a sudden attack, before the city along with some signs, such as vibration, noise, leakage, fever, etc., to A certain level to lead to problems. If these signs can be found in real time, and to be controlled or swept, High Viscosity Fluid Pump showed the chance to reduce the problem. Therefore, to understand the typical type of High Viscosity Fluid Pump, help to analyze its connotation of contact, so as to further confirm the type of illness and the cause of the disease, the site.