Categories
Contact Us

Dongguan Qiaochu Mechanical & Electrical Technology Co.,Ltd

Address: No.3, Yaxin Alley, Xiaobian Second Industrial Park, Chang An Town, Dongguan City, Guangdong Province, China

Tell: 86-769-82586255

Fax: 86-769-85078982

Mobile/Whatsapp:+8613650002375/18070104929

Wechat:13650002375

Email: sales@qc-automatic.com

Service Hotline
+86-769-82586255

News

Home > NewsContent

Automatic Assembly Machine Equipment Construction Is Simple

1. The general definition of assembly automation In layman's terms, assembly refers to the number of parts of the product through tight match, buckle, thread connection, bonding, riveting, welding, etc. together to meet the predetermined dimensional accuracy and Function of the finished product (semi-finished product). By the manual processing (contact, finishing, crawling, moving, placing, force, etc.) to achieve the assembly of each component, strictly speaking, can only be called artificial assembly. Assembly that does not need to be done by manual processing (contact, sorting, gripping, moving, placing, etc.) can be called automatic assembly. Between the two for semi-automatic assembly. 2. The composition of the automatic assembly machine (to be assembled parts flow timing to discuss) 1. Parts orientation arrangement, transportation, escapement system will be chaotic parts automatically to the machine automatically handle the spatial orientation of automatic orientation, and then smooth delivery To the follow-up escapement, for the follow-up of the robot to grasp the preparation. 2. Crawl - Displacement - The placement mechanism will be caught by the escapement of the escapement of the zero (parts) or vacuum suction, and then moved to another location (usually the assembly working position). 3. Assemble the working mechanism refers to the assembly used to complete the main work of the assembly, such as the workpiece into the press, clamping, screw, card, bonding, welding, riveting, bonding, welding on the last part. 4. The detection mechanism is used to detect the results of the work on the components or machines that have been assembled in the previous step, such as missing parts detection, size detection, defect detection, function detection, cleaning inspection. 5. The removal mechanism of the workpiece is used to classify the qualified parts and unqualified parts from the machine. 3. Automatic assembly machine The most common form of transmission structure 1) According to the assembly of the workpiece in the machine flow time coherence to points, there are gap motion assembly machine and continuous sports machine. 2) According to the number of working parts in the assembly machine, there are single-station assembly machine and multi-station assembly machine. 3) According to the transmission path of the workpiece in the assembly machine, there are round table assembly machine and ring table assembly machine. 4. Automatic assembly machine control system is usually used PLC control, PLC to receive a variety of signal input, issued to the implementing agencies instructions. The machine is equipped with a variety of sensors and other signal collectors to monitor the operation of each actuator in the machine, after the decision to issue the next step in the implementation of the instructions. The man-machine interface is used to display the operation of the machine, the operating record, and the instructions used by the operator to the machine.

  Automatic assembly machine growth status Although the non-standard equipment industry as a whole showing an obvious upward trend, that is, non-standard equipment market space broad and broad-minded, and even some of the traditional wealth will likely become the largest market potential. Non-standard equipment is no scale to follow, according to the production status of enterprises tailored equipment. Adhere to the use of doctrine, research and development of less. At present, more than a dozen small workshop production is still long and short standard equipment industry mainstream form. But such a project, for only 10 small businesses, but there is a considerable attraction. Compilation Conclusion: At present, China's non-standard automation mechanized enterprises more, but smaller, backward technology, competition is the characteristics of homogeneity. However, the number of non-standard enterprises in China, the smaller scale, backward technology, competitive homogeneity is also a significant flaw, and in this scale and fortune at least 10-20 years gap.

         With the continuous improvement of labor costs, more and more enterprises began to focus on the scale of industrial automation equipment, a short length of the standard automation equipment, it is not as simple as the traditional standard equipment construction is simple, but flexible tailored, Convenience and functional diversity to the industry has brought new growth opportunities. By 2012, light in China's hardware manufacturing center Changan, non-standard equipment factory there are more than 70, the national small-scale non-standard equipment has been numerous, the number of more than 10,000; market size estimates also increased to about 600 billion. Query statistics related data, non-standard equipment, the size of the estimated 600 million, which accounted for about 30% of the market share of about 70%.

        With the continuous improvement of labor costs, more and more enterprises began to focus on the scale of industrial automation equipment, a short length of the standard automation equipment, it is not as simple as the traditional standard equipment construction is simple, but flexible tailored,Automatic Assembly Machine Convenience and functional diversity to the industry has brought new growth opportunities. In 2000, the domestic non-standard equipment is well known only the Pearl River Delta and the Yangtze River Delta, some of the Taiwan plant, these plants add up to 30 mercy. This practice is very positive in many respects.