Categories
Contact Us

Dongguan Qiaochu Mechanical & Electrical Technology Co.,Ltd

Address: No.3, Yaxin Alley, Xiaobian Second Industrial Park, Chang An Town, Dongguan City, Guangdong Province, China

Tell: 86-769-82586255

Fax: 86-769-85078982

Mobile/Whatsapp:+8613650002375/18070104929

Wechat:13650002375

Email: sales@qc-automatic.com

Service Hotline
+86-769-82586255

News

Home > NewsContent

Automatic Assembly Machine By The Operator To The Machine Issued Instructions

1. The general definition of Automatic Assembly Machine

In layman's terms, the assembly refers to the number of parts of the product through tight match, buckle, thread connection, bonding, riveting, welding, etc. together to meet the predetermined dimensional accuracy and function of finished products (semi-finished products). By the manual processing (contact, finishing, crawling, moving, placing, force, etc.) to achieve the assembly of each component, strictly speaking, can only be called artificial assembly. Assembly that does not need to be done by manual processing (contact, sorting, gripping, moving, placing, etc.) can be called automatic assembly. Between the two for semi-automatic assembly.

2. The composition of the automatic assembly machine (discussed in terms of the timing of the assembled parts flow)

1. Parts orientation arrangement, transportation, escapement system

Will be chaotic parts of the machine automatically to facilitate the automatic positioning of the spatial orientation of the arrangement, and then successfully transported to the follow-up escapement for the follow-up robot to grasp the preparation.

2. Crawl - Shift - Placement

Will be caught by the escapement of the location of the zero (parts) caught or vacuum suction, and then moved to another location (usually the assembly work position).

3. Assemble the working body

Refers to the assembly work to complete the main action of the body, such as the workpiece into the press, clamping, screw, card, bonding, welding, riveting, bonding, welding on the last part.

4. Detection organization

It is used to detect the results of one step of the finished parts or the machine,Automatic Assembly Machine such as missing parts detection, size detection, defect detection, function detection, cleaning material inspection.

5. Removal of the workpiece

Used to sort out the qualified parts and unqualified parts from the machine.

Three. Automatic assembly machine The most commonly used form of transmission structure

1) According to the flow of the workpiece in the machine in terms of the continuity of time points, there are gap moving machine and continuous sports machine.

2) According to the number of working parts in the assembly machine,Automatic Assembly Machine there are single-station assembly machine and multi-station assembly machine.

3) According to the transmission path of the workpiece in the assembly machine, there are round table assembly machine and ring table assembly machine.

IV. Automatic assembly machine control system

Usually using PLC control, PLC to receive a variety of signal input, issued to the implementing agencies instructions. The machine is equipped with a variety of sensors and other signal collectors to monitor the operation of each actuator in the machine,Automatic Assembly Machine after the decision to issue the next step in the implementation of the instructions. The man-machine interface is used to display the operation of the machine, the operating record, and the instructions used by the operator to the machine.